Minix 2.0.0/2.0.2 subpartition support.
=======================================

  Minix subpartition support is provided in `linux/drivers/block/genhd.c'.
Minix partitions are shown with the device name suffixed with an `@'
followed by any detected subpartitions inside angle brackets, like this:

Partition check:
 hda: hda1 hda2@ < hda5 hda6 > hda3 hda4

Usage
=====

Add entries to /etc/fstab, change for your setup:
 /dev/hda5	/mnt/minix	minix	rw,noauto	0	0
 /dev/hda6	/mnt/minix/usr	minix	rw,noauto	0	0

To mount your Minix filesystems:
 mount /mnt/minix		# mount /
 mount /mnt/minix/usr		# mount /usr


Note
====

The first sector of a Minix 2.0.0/2.0.2 partition containing 
subpartitions looks like the master boot record (MBR) on the first 
sector of the hard disk. 

It has
 1) a small loader program which loads the boot sector from
          the Minix root partition (usually hd?a).
 2) a small partition table which gives the starting 
	  C/H/S values and sizes for the 4 Minix subpartitions.

If there are no subpartitions then the first sector of the Minix
partition contains the usual boot sector.

Bug Reports
===========

Anand Krishnamurthy <anandk@wiproge.med.ge.com>
Rajeev V. Pillai    <rajeevvp@yahoo.com>