Video related definitions and functions (writing) More...

Functions
void	quicktime_set_framerate (quicktime_t *file, double framerate)
	Set the framerate for encoding. More...

int	quicktime_set_video (quicktime_t file, int tracks, int frame_w, int frame_h, double frame_rate, char compressor)
	Set up video tracks for encoding. More...

void	quicktime_set_jpeg (quicktime_t *file, int quality, int use_float)
	Set jpeg encoding quality. More...

void	quicktime_set_parameter (quicktime_t file, char key, void *value)
	Set a codec parameter. More...

void	quicktime_set_depth (quicktime_t *file, int depth, int track)
	Set the depth of a video track. More...

int	quicktime_write_frame (quicktime_t file, uint8_t video_buffer, int64_t bytes, int track)
	Write a compressed video frame. More...

int	quicktime_writes_cmodel (quicktime_t *file, int colormodel, int track)
	Check if a colormodel is supported for encoding. More...

int	quicktime_encode_video (quicktime_t file, unsigned char *row_pointers, int track)
	Encode a video frame. More...

int	lqt_set_pixel_aspect (quicktime_t *file, int track, int pixel_width, int pixel_height)
	Set the pixel aspect ratio of a video track. More...

int	lqt_set_interlace_mode (quicktime_t *file, int track, lqt_interlace_mode_t mode)
	Set the interlace mode. More...

int	lqt_set_video (quicktime_t file, int tracks, int frame_w, int frame_h, int frame_duration, int timescale, lqt_codec_info_t codec_info)
	Set up video tracks for encoding. More...

int	lqt_add_video_track (quicktime_t file, int frame_w, int frame_h, int frame_duration, int timescale, lqt_codec_info_t codec_info)
	Add a video track for encoding. More...

int	lqt_set_video_codec (quicktime_t file, int track, lqt_codec_info_t info)
	Set a codec for an audio track. More...

int	lqt_set_video_pass (quicktime_t file, int pass, int total_passes, const char stats_file, int track)
	Enable multipass encoding. More...

int	lqt_encode_video (quicktime_t file, unsigned char *row_pointers, int track, int64_t time)
	Encode one video frame. More...

int	lqt_encode_video_d (quicktime_t file, unsigned char *row_pointers, int track, int64_t time, int duration)
	Encode one video frame. More...

void	lqt_set_video_pts_offset (quicktime_t *file, int track, int64_t offset)
	Set an video pts offset. More...

Detailed Description

Video related definitions and functions (writing)

The video API changed a lot during the last years (causing lot of confusion), so here is the preferred way: Use the Codec registry functions to get all supported video encoders. Once you found a codec (i.e. a lqt_codec_info_t ), call lqt_add_video_track to add the track to the file. You can repeat this procedure to add as many tracks as you like with different formats and/or codecs. You can pass further format parameters with lqt_set_pixel_aspect.

A very important thing is the colormodel (see Color handling): First obtain the colormodel used natively by the codec with lqt_get_cmodel. Your application might or might not support all colormodels, which exist in libquicktime. The more colormodels you can handle yourself, the better, since libquicktimes built in colormodel converter is not the best. Thus, it's the best idea to pack all colormodels you can handle yourself into an array, and call lqt_get_best_colormodel to get the best colormodel. After you figured out, which colormodel you use, tell this to libquicktime with lqt_set_cmodel.

Next you might want to set some compression parameters. This is done by calling lqt_set_video_parameter. Supported parameters and valid ranges are in the lqt_codec_info_t.

Actual encoding should happen with lqt_encode_video.

Function Documentation

void quicktime_set_framerate	(	quicktime_t *	file,
		double	framerate
	)

Set the framerate for encoding.

Parameters

file	A quicktime handle
framerate	framerate

Sets the framerate for encoding.

This function is depracated and should not be used in newly written code.

int quicktime_set_video	(	quicktime_t *	file,
		int	tracks,
		int	frame_w,
		int	frame_h,
		double	frame_rate,
		char *	compressor
	)

Set up video tracks for encoding.

Parameters

file	A quicktime handle
tracks	Number of tracks
frame_w	Frame width
frame_h	Frame height
frame_rate	Frame rate (in frames per second)
compressor	Four character code of the compressor

This function is depracated and should not be used in newly written code. It won't allow you to set multiple video streams with different formats, and passing a double framerate causes rounding errors. Use lqt_add_video_track instead.

void quicktime_set_jpeg	(	quicktime_t *	file,
		int	quality,
		int	use_float
	)

Set jpeg encoding quality.

Parameters

file	A quicktime handle
quality	Quality (0..100)
use_float	Use floating point routines

Set the jpeg encoding quality and whether to use floating point routines. This should be called after creating the video track(s).

This function is depracated and should not be used in newly written code. Use lqt_set_video_parameter instead.

void quicktime_set_parameter	(	quicktime_t *	file,
		char *	key,
		void *	value
	)

Set a codec parameter.

Parameters

file	A quicktime handle
key	Short name of the parameter
value	Parameter value.

For integer parameters, value must be of the type int*. For string parameters, use char*.

This function sets the same parameter for all video AND audio streams, which is quite idiotic. Use lqt_set_audio_parameter and lqt_set_video_parameter to set codec parameters on a per stream basis.

void quicktime_set_depth	(	quicktime_t *	file,
		int	depth,
		int	track
	)

Set the depth of a video track.

Parameters

file	A quicktime handle
depth	The depth (bits per pixel)
track	index (starting with 0)

This function is deprecated and should never be called. The depth is set by the codecs and there is no reason to change this.

int quicktime_write_frame	(	quicktime_t *	file,
		uint8_t *	video_buffer,
		int64_t	bytes,
		int	track
	)

Write a compressed video frame.

Parameters

file	A quicktime handle
video_buffer	The compressed frame
bytes	Bytes of the compressed frame
track	index (starting with 0)

If you get compressed video frames (e.g. from a firewire port), use this function to write them into a quicktime container. Before, you must set up the track with lqt_add_video_track or, if no software codec is present, with quicktime_set_video .

int quicktime_writes_cmodel	(	quicktime_t *	file,
		int	colormodel,
		int	track
	)

Check if a colormodel is supported for encoding.

Parameters

file	A quicktime handle
colormodel	A colormodel (see Color handling)
track	index (starting with 0)

Returns: 1 if the colormodel can be used for encoding calls, 0 if it can't.

To let libquicktime get the best colormodel out of a list of colormodels your application supports, use lqt_get_best_colormodel instead.

int quicktime_encode_video	(	quicktime_t *	file,
		unsigned char **	row_pointers,
		int	track
	)

Encode a video frame.

Parameters

file	A quicktime handle
row_pointers	Frame buffer (see lqt_rows_alloc )
track	index (starting with 0)

Encode one video frame. This works only for constant framerate streams. For nonconstant framerates, you'll want to use lqt_encode_video instead.

int lqt_set_pixel_aspect	(	quicktime_t *	file,
		int	track,
		int	pixel_width,
		int	pixel_height
	)

Set the pixel aspect ratio of a video track.

Parameters

file	A quicktime handle
track	Track index (starting with 0)
pixel_width	Pixel width
pixel_height	Pixel height

Returns: 1 if the call was successful, 0 if there is no such track

int lqt_set_interlace_mode	(	quicktime_t *	file,
		int	track,
		lqt_interlace_mode_t	mode
	)

Set the interlace mode.

Parameters

file	A quicktime handle
track	Track index (starting with 0)
mode	The interlace mode.

Returns: 1 if the call was successful, 0 if there is no such track

This will in most cases store the correct interlacing information in the file (e.g. in the fiel atom). For tweaking the fiel atom directly, advanced users might look at lqt_set_fiel.

int lqt_set_video	(	quicktime_t *	file,
		int	tracks,
		int	frame_w,
		int	frame_h,
		int	frame_duration,
		int	timescale,
		lqt_codec_info_t *	codec_info
	)

Set up video tracks for encoding.

Parameters

file	A quicktime handle
tracks	Number of video tracks
frame_w	Image width
frame_h	Image height
frame_duration	Duration of one frame. This can later be overridden
timescale	Timescale of the track
codec_info	Codec to use (see Codec registry )

This sets one or more video tracks for encoding. The framerate is passed as a rational number (timescale/frame_duration). E.g. for an NTSC stream, you'll choose timescale = 30000 and frame_duration = 1001. To set up multiple video tracks with different formats and/or codecs, use lqt_add_video_track .

int lqt_add_video_track	(	quicktime_t *	file,
		int	frame_w,
		int	frame_h,
		int	frame_duration,
		int	timescale,
		lqt_codec_info_t *	codec_info
	)

Add a video track for encoding.

Parameters

file	A quicktime handle
frame_w	Image width
frame_h	Image height
frame_duration	Duration of one frame. This can later be overridden
timescale	Timescale of the track
codec_info	Codec to use (see Codec registry ) or NULL

This sets one or more video tracks for encoding. The framerate is passed as a rational number (timescale/frame_duration). E.g. for an NTSC stream, you'll choose timescale = 30000 and frame_duration = 1001. Call this function to subsequently to add as many tracks as you like.

If you passed NULL for the codec_info, you should call lqt_set_video_codec once you know which codec to use.

int lqt_set_video_codec	(	quicktime_t *	file,
		int	track,
		lqt_codec_info_t *	info
	)

Set a codec for an audio track.

Parameters

file	A quicktime handle
track	Track index (starting with 0)
info	The codec to be used for encoding

int lqt_set_video_pass	(	quicktime_t *	file,
		int	pass,
		int	total_passes,
		const char *	stats_file,
		int	track
	)

Enable multipass encoding.

Parameters

file	A quicktime handle
track	Track index (starting with 0)
pass	The number of this pass (starting with 1)
total_passes	The total number of passes
stats_file	Statistics file

This is a purely optional function, which enables multipass encoding. Multipass encoding is done by repeatedly opening a quicktime file, encoding video and and closing it again. The stats_file parameter must always be the same for all passes.

Having more than 2 passes is not always useful. Audio encoding can be skipped for all passes until the last one.

int lqt_encode_video	(	quicktime_t *	file,
		unsigned char **	row_pointers,
		int	track,
		int64_t	time
	)

Encode one video frame.

Parameters

file	A quicktime handle
row_pointers	Frame (see lqt_rows_alloc)
track	Track index (starting with 0)
time	Timestamp of the frame in timescale tics

Returns: 0 if the frame was encoded, 1 else.

Encode one video frame. The presentation timestamp is in timescale tics with the timescale you passed to lqt_add_video_track or lqt_set_video . WARNING: AVI files don't support arbitrary timestamps. For AVI files time is ignored, instead it's frame_number * frame_duration,

int lqt_encode_video_d	(	quicktime_t *	file,
		unsigned char **	row_pointers,
		int	track,
		int64_t	time,
		int	duration
	)

Encode one video frame.

Parameters

file	A quicktime handle
row_pointers	Frame (see lqt_rows_alloc)
track	Track index (starting with 0)
time	Timestamp of the frame in timescale tics
duration	Duration of the frame

Returns: 0 if the frame was encoded, 1 else.

This is the same as lqt_encode_video except that you can pass the duration along with the timestamp. This is really only important for the last picture, since all other durations are calculated from the timestamp differences.

Since 1.1.2

void lqt_set_video_pts_offset	(	quicktime_t *	file,
		int	track,
		int64_t	offset
	)

Set an video pts offset.

Parameters

file	A quicktime handle
track	Track index (starting with 0)
offset	PTS of the first video frame (in timescale units)

Functions

Detailed Description

Function Documentation